Maxi Jet Wave
Maxi Jet Wave
Growers love the Maxi Jet range for its true versatility. Use it as a submersible pump in your hydroponic tank or keep it outside for easy maintenance.
This Maxi Jet model blows competitors out of the water. This 2-in-1 pump can be used underwater or externally!
The Wave runs at a fraction of the cost of the original Maxi Jets. They use 2.8W and 3.2W of energy respectively - less than a quarter than their predecessors.
This means you’ll see the same results, just with a considerably lower energy bill. Its exceptional efficiency means each model costs less than 0.1p per hour to run.
360° adjustable water outlet
Just like the others in the Maxi Jet range, this model has a fully moveable outlet. Position it and rotate for easy reach, or to keep out the way of your other equipment.
Adjustable flow rate
Use the dial on the underside of the pump to adjust the Wave’s speed. The speed dial is easy to reach, yet out of the way of the rest of your equipment - or clumsy hands.
The Wave’s adjustable flow provides the freedom to control the pump according to plants’ needs.
The Wave secures into place using a strong magnetic attachment - no glues, screws, or adhesive needed. This means there are no permanent changes to your hydroponic system and you can remove and replace the pump as many times as needed. It couldn’t be easier to clean or adjust.
The magnet works for glass up to 10mm thick - just place one piece of the magnet on the outside of your hydroponic tank (if using as a submersible pump) and the other inside the tank.
The magnet also has an anti-vibration feature - so, even as the pump works, there will be no noise or movement.
How to use the Maxi Jet Wave?
Submersible use: Ensure the appliance is turned off before installing. Attach a 12mm or 16mm pipe to the outlet and submerge the pump in your hydroponic tank or reservoir.
Place the pump onto the area you would like to fix the Maxi Jet Wave, with the magnetic fixture facing the wall of the tank. Place the second magnetic piece directly parallel to the pump on the outside of the tank. The magnets should secure the Maxi Jet Wave firmly in place.
You may rotate the pump’s outlet in any direction so that it fits comfortably in your hydroponic system.
External use: Ensure the appliance is turned off before installing. Attach a 12mm or 16mm pipe to the inlet and outlet of the pump. Place outside of your reservoir or hydroponic tank, less than 0.65m (65cm) above the water line. Secure using the magnetic attachment to a wall, board, or surface less than 10mm thick.
While the pump has a self-cleaning impeller, we recommend that you run your usual hydroponic cleaning solution through the pump every so often to keep operation as smooth as possible. If you notice any fallen leaves or algae buildup on the pump, turn it off, remove it from your tank (if submerged) and clean gently with a cloth.
Where to use the Maxi Jet Wave?
The Maxi Jet Wave is suitable for use in hydroponic systems, tanks, and reservoirs (including NFTs and Flood & Drain systems).
If using the magnetic fixture, attach to a piece of glass up to 10mm thick.
Why choose the Maxi Jet Wave?
- Submersible multi-use pump;
- Can be used underwater or externally;
- Adjustable flow rate;
- Compact size;
- Magnet attachment - no screws or glue;
- Self-cleaning, lubricated impeller;
- Silent operation.
- 1 x Maxi Jet Wave (pump, rotor, and protective grill);
- 1 x Magnetic Fixture;
- 1 x 2.5m Cable.
- Brand: Maxi Jet
- Required Tube Diameter: 12 / 16mm
- Cable Length: 2.5m
- Brand: Maxi Jet