Centurion DBT1 & DBT2 Dry Batch Trimmer
Centurion DBT1 and DBT2
The DBT1 is the most cost-effective in the Centurion range, producing up to 8lb per hour of dry trimmed plants and herbs.
If you’re looking for a mid-sized model, the DBT2 produces up to 15lb per hour, making it a perfect step up for an individual user.
It also has 10 speed settings for a precise trim every time.
Soft Tumble technology
Centurion uses their unique Soft Tumble technology to ensure all plants are carefully processed. There’s no need for a suction system or lubricants, which can harm delicate leaves and flowers. Rougher trimmers can cause you to lose trimmings along the way, but Centurion’s softly-softly approach delivers an exceptional result every time.
The DBT sits on a sturdy metal frame. This keeps it as precise as possible: there’s no slipping on flimsy legs or vibration whilst in use.
It has two moulded metal handles for easy grip whilst in use, as well as for easy carrying when it’s turned off. Its sleek black design allows users to easily see the plants they’re trimming and sets it apart from its metal bin.
How to clean Centurion DBT?
This appliance will need regular cleaning to prevent accumulation of sticky residue and pollen. We recommend that you clean it after every use, or before if you notice significant buildup. Excess plant residue can inhibit the speed and sharpness of the blades.
Ensure that the trimmer is unplugged from the mains. You will then need to disassemble it:
Remove the top cover and brush;
Remove the trimming tray and tumbler lid;
Loosen the blade sheet by releasing the small lever on the side of the blade. Then, carefully remove the tumbler from the inside of the appliance.
Unhook the blade sheet and carefully slide it out of the inside of the trimmer.
The motor on the DBT is not waterproof. We suggest that you tape a plastic bag or sheet securely to the motor to prevent water damage.
Remove any excess dust or pollen from the trimmer using a clean and dry brush. Then, clean the inside of the trimmer and all trimmer components using a soft, damp cloth. It is best to use warm water with washing up liquid. Avoid putting water or your wet cloth near the motor shaft.
Do not use a pressure washer, hose, or cleaning appliance to clean the exterior of the Centurion DBT. You may use a pressure washer to clean the following components when they are removed from the trimmer:
Avoid pressure washing near the delicate metal bearings of these parts.
If the plant residue is particularly hard to remove, you can finely spray the trimmer components with cooking oil. You may also use a degreaser, but make sure that the brand you choose will not damage the paint or metalwork on the trimmer components. Leave for 3-12 hours before attempting to clean again.
Let all parts dry thoroughly before reassembling the trimmer.
After you have cleaned the trimmer, run empty for 5 minutes before the next use.
Why choose Centurion DBT?
Gently removes excess plant leaves and stems;
Soft Tumble Technology removes the need for suction systems;
Most cost-effective model in the Centurion DBT range;
Lightweight, with handles for easy carrying;
Trim bin included.
- Brand: Centurion